Sistem Pendeteksi Posisi Kendaraan Kecil pada Dump Truck Tambang menggunakan Modul Radio Frekuensi 433 MHz dan Radar Ultrasonik

Authors

  • Riska Tea Ayu Cindy Mavia
  • Diky Siswanto Siswanto
  • Gigih Priyandoko

DOI:

https://doi.org/10.31328/jasee.v3i02.247

Keywords:

detection system; ultrasonic radar; 433 MHz radio frequency; mining dump truck.

Abstract

Accidents with mining dump trucks are still common, especially those with small vehicles located in mining locations. The limited visibility of the driver of the large dump truck to see small vehicles around it cause these accidents. This paper presents a small vehicle detection system prototype designed to improve the visibility of the dump truck’s driver. This system works by initially a dump truck detecting the 433 MHz radio frequency, which indicates the small vehicle is around the dump truck. A buzzer sound, controlled by Fuzzy logic according to the distance of small vehicles, also equips the system. It then triggers the truck’s ultrasonic radar to sense the position of small vehicles. The warning information will be displayed on the 16 x 2 LCD. At the same time, a TFT LCD presents the angle and distance of small vehicles. With this system, a dump truck's driver can realize the presence of small vehicles earlier and detect the position and distance of those vehicles.

References

R. A. Simanjuntak and R. Abdullah, “Tinjauan Sistem dan Kinerja Manajemen Keselamatan & Kesehatan Kerja Tambang Bawah Tanah CV. Tahiti Coal, Talawi, Sawahlunto, Sumatera Barat,” J. Bina Tambang, vol. 3, no. 4, pp. 1536–1545, 2017.

M. R. Widara, A. S. Sari, E. Nursanto, M. T. Pertambangan, and U. P. N. V. Yogyakarta, “Biaya Operasi Dump Truck HD605 Komatsu pada Pengangkutan Batu Gamping di PT XYZ Kabupaten Bogor,” pp. 1–8, 2018.

P. S. Frima Yudha and R. A. Sani, “Implementasi Sensor Ultrasonik Hc-Sr04 Sebagai Sensor Parkir Mobil Berbasis Arduino,” EINSTEIN e-JOURNAL, vol. 5, no. 3, 2019, doi: 10.24114/einstein.v5i3.12002.

P. Seminar et al., “Desain model pembelajaran radar menggunakan sensor ultrasonik 1),” vol. 2019, pp. 51– 57, 2019.

P. P. D. J. C. Henriques, I. G. A. P. R. Agung, and L. Jasa, “Rancang Bangun Sensor Jarak sebagai Alat Bantu Memarkir Mobil berbasis Mikrokontroler Arduino Uno,” Maj. Ilm. Teknol. Elektro, vol. 17, no. 1, p. 72, 2018, doi: 10.24843/mite.2018.v17i01.p10.

F. S. Nur Rohman, A. A. Fikri, A. nur Fuad, R. Rohim, and R. Firmansyah, “Telemetri Flowmeter Menggunakan RF Modul 433MHz,” J. Electr. Electron. Eng., vol. 1, no. 1, p. 8, 2017, doi: 10.21070/jeee-u.v1i1.9.

. Suhendar P.Anggoro Suryo, P.Pances, “Pengendali Listrik Alat Rumah Tangga Untuk Menjaga Stabilitas Beban Lebih,” Pros. SENTIA, vol. 7, no. 1, pp. 78–83, 2015.

L. Renaldi, S. Hadiyoso, D. N. Ramadan, and S. Pd, “PROTOTIPE RADAR SEBAGAI PENDETEKSI OBJEK Radar Prototype as Objects Detector,” Appl. Sci., vol. 3, no. 3, pp. 2159–2165, 2017.

M. Attubel, D. Siswanto, and M. Mukhsim, “Sistem Monitoring Perawatan Kendaraan Berbasis Internet of Things ( IOT ),” Ciastech 2019, no. Ciastech, pp. 331– 338, 2019.

Published

2022-10-31

How to Cite

Mavia, R. T. A. C. ., Siswanto, D. S., & Priyandoko, G. (2022). Sistem Pendeteksi Posisi Kendaraan Kecil pada Dump Truck Tambang menggunakan Modul Radio Frekuensi 433 MHz dan Radar Ultrasonik. JASEE Journal of Application and Science on Electrical Engineering, 3(02), 46–58. https://doi.org/10.31328/jasee.v3i02.247

Issue

Section

Control, Robotics and System

Most read articles by the same author(s)

1 2 > >>