MONITORING LAMPU DAN PELACAK LOKASI MOBIL DENGAN FITUR KEAMANAN SWITCH CUT OFF ENGINE BERBASIS ARDUINO
DOI:
https://doi.org/10.31328/jasee.v5i2.539Keywords:
MIT APP, MQTT, NodeMCU ESP8266, ACS712, GPS NEO 6, LCD 16x2, ArduinoAbstract
It's hard to know if one person does it. All this time, checking the rear lights is done conventionally by looking directly behind the car and requiring two people, such a way is less efficient. Besides, the car owner needs to know the location of the car, if the car is out of control of the owner. The research builds a light monitoring system and a car location tracker with a button to turn off the engine remotely using a smartphone. The research uses ACS712 sensors, Arduino Mega, Buzzer, LCD 16x2 with I2C modules, NodeMCU ESP8266, GPS module, WIFI modem, Relay module and the MIT APP Inventor Android app. This system's communication protocol uses the MQTT protocol, and the broker of this system uses the private broker's cloud. Researching the monitoring of lights using Panther and Genio cars, the system can distinguish when there are sensors that don't detect current, the buzzers are ringing and the LCD displays the "Lamp Off" character, as well as showing which lights are switched off. When all the sensors detect current then the buzzer is off, and the lcd displages the "OKE SYSTEM". The tracker system can display coordinate points and can be integrated with google maps. As well as the relay module can be controlled using buttons on the application so that the machine can die. This whole system uses smartphones remotely
References
C. D. Hantoro dan S. Setiawidayat, “MONITORING AND CONTROL OF 3 PHASE ELECTRICAL ENERGY INTERNET OF THINGS (IOT),” European Journal of Electrical Engineering and Computer Science, vol. 7, no. 3, hlm. 80–86.
A. Priyanto, S. Setiawidayat, dan F. Rofii, “DESIGN AND BUILD AN IOT BASED PREPAID WATER USAGE MONITORING SYSTEM AND TELEGRAM NOTIFICATIONS,” JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), vol. 5, no. 2, hlm. 197–213, Okt 2021.
I. Yessianto, S. Setiawidayat, D. U. Effendy, dan S. Einthoven, “PERANCANGAN ALAT MONITORING SINYAL JANTUNG MENGGUNAKAN ARDUINO,” Conference on Innovation and Application of Science and Technology (CIASTECH 2018), hlm. 601–608, 2018.
N. Mamuriyah dan A. Tony, “SISTEM KENDALI DAN MONITORING LAMPU RUANGAN BERBASIS INTERNET OF THINGS,” telcomatics, vol. 7, no. 2, Des 2022, doi: 10.37253/telcomatics.v7i2.7346.
Yosef Doly Wibowo, “IMPLEMENTASI MODUL GPS UBLOX 6M DALAM RANCANG BANGUN SISTEM KEAMANAN MOTOR BERBASIS INTERNET OF THINGS,” ELE, vol. 15, no. 2, hlm. 107–115, Mei 2021, doi: 10.23960/elc.v15n2.2173.
R. Putra, N. Hikmah, dan L. Kurnia, “RANCANG BANGUN SISTEM KEAMANAN SEPEDA MOTOR BERBASIS RFID DAN GPS TRACKER,” JASEE, vol. 2, no. 02, hlm. 75–86, Sep 2021, doi: 10.31328/jasee.v2i02.170.
B. Artono dan R. G. Putra, “PENERAPAN INTERNET OF THINGS (IOT) UNTUK KONTROL LAMPU MENGGUNAKAN ARDUINO BERBASIS WEB,” J-TIT, vol. 5, no. 1, hlm. 9–16, Apr 2019, doi: 10.25047/jtit.v5i1.73.
A. Kurnianto, J. Dedy Irawan, dan F. Xaverius Ariwibisono, “PENERAPAN IOT (INTERNET OF THINGS) UNTUK CONTROLLING LAMPU MENGGUNAKAN PROTOKOL MQTT BERBASIS WEB,” jati, vol. 6, no. 2, hlm. 1153–1161, Jan 2023, doi: 10.36040/jati.v6i2.5393.
G. Y. Saputra, A. D. Afrizal, F. K. R. Mahfud, F. A. Pribadi, dan F. J. Pamungkas, “PENERAPAN PROTOKOL MQTT PADA TEKNOLOGI WAN (STUDI KASUS SISTEM PARKIR UNIVERISTAS BRAWIJAYA),” Jurnal Informatika Mulawarman, vol. 12, no. 2, Sep 2017.
C. Y. Windra, “PENERAPAN MIKROKONTROLER ARDUINI MEGA 2560 SEBAGAI MONITORING PADA PEMBACAAN ARUS 3 PHASA DI GARDU INDUK 150KV LUBUK ALUNG,” JURNAL TEKNIK ELEKTRO ITP, vol. 10, no. 1, 2021.
E. L. Sari, “RANGKAIAN SISTEM KELISTRIKAN LAMPU PENERANGAN, LAMPU REM, DAN KLAKSON PADA KENDARAAN MITSUBISHI L300,” RIDTEM (Riset Diploma Teknik Mesin), vol. 1, no. 1, Mar 2018.
B. Purnomo dan M. A. Yakin, “PERANCANGAN MONITORING LAMPU MATI PADA BANGUNAN BERTINGKAT BERBASIS IOT,” JTE : Jurnal Teknik Elektro, vol. 5, no. 2, 2021.
A. L. Alviero dan D. Setiawan Nugroho, “PENGAPLIKASIAN SENSOR ARUS ACS712 SEBAGAI PROTEKSI PADA ALAT PENGHITUNG KERTAS OTOMATIS BERBASIS IOT,” Metrotech, vol. 2, no. 1, hlm. 7–13, Jan 2023, doi: 10.33379/metrotech.v2i1.2067.
M. R. Satriawan, G. Priyandoko, dan S. Setiawidayat, “MONITORING PH DAN SUHU AIR PADA BUDIDAYA IKAN MAS KOKI BERBASIS IOT,” Jambura Journal of Electrical and Electronics Engineering, vol. 5, no. 1, hlm. 12–17, Jan 2023.
G. D. Ramady, H. Yusuf, R. Hidayat, A. G. Mahardika, dan N. S. Lestari, “RANCANG BANGUN MODEL SIMULASI SISTEM PENDETEKSI DAN PEMBUANGAN ASAP ROKOK OTOMATIS BERBASIS ARDUINO,” 2020.
S. P. Santosa dan R. M. W. Nugroho, “RANCANG BANGUN ALAT PINTU GESER OTOMATIS MENGGUNAKAN MOTOR DC 24 V,” vol. 9, no. 1, 2021.
M. F. Wicaksono, “IMPLEMENTASI MODUL WIFI NODEMCU ESP8266 UNTUK SMART HOME,” vol. 6, 2017.
F. A. Yaqin, D. Rahmawati, A. F. Ibadillah, dan K. A. Wibisono, “PERANCANGAN POWER SUPPLY SWITCHING DENGAN POWER FACTOR CORRECTION (PFC) UNTUK MENGOPTIMALKAN DAYA OUTPUT DAN PENGAMAN PROTEKSI HUBUNG SINGKAT,” JAEI, vol. 7, no. 2, hlm. 42, Agu 2021, doi: 10.19184/jaei.v7i2.23674.
F. A. Perdana, “BATERAI LITHIUM,” INKUIRI, vol. 9, no. 2, hlm. 113, Apr 2021, doi: 10.20961/inkuiri.v9i2.50082.
B. K. A. Putra, A. Prakosa, dan I. B. Kurniawan, “SISTEM PEMANTAUAN MOBIL RENTAL MENGGUNAKAN GPS TRACKER,” SEMNASA, 2023.
S. Edriati, L. Husnita, E. Amri, A. A. Samudra, dan N. Kamil, “PENGGUNAAN MIT APP INVENTOR UNTUK MERANCANG APLIKASI PEMBELAJARAN BERBASIS ANDROID,” E-Dimas, vol. 12, no. 4, hlm. 652–657, Des 2021, doi: 10.26877/e-dimas.v12i4.6648.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 JASEE Journal of Application and Science on Electrical Engineering

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.