SISTEM MONITORING DAN CONTROLLING MOTOR HOIST CRANE BERBASIS IOT

Muhammad Bayu Aji Tetuko

doi:10.31328/jasee.v6i1.05

Authors

Muhammad Bayu Aji Tetuko Universitas Widyagama Malang

DOI:

https://doi.org/10.31328/jasee.v6i1.05

Abstract

Companies engaged in the steel industry utilize machines and lifting equipment to support productivity. Hoist cranes are lifting machines widely used in companies, ports, factories, warehouses, and the steel industry. They are mechanical devices used to move objects from one place to another. However, one common problem with hoist cranes is the occurrence of overcurrent in the motor, which triggers the circuit breaker to trip. In such cases, the operator must climb onto the chassis or body of the hoist crane to reset the system manually. To address this issue, an IoT-based hoist crane monitoring and control system was developed using a power sensor module to measure real power (Watts), voltage (Volts), current (Amperes), and power factor (pf) in real time via an internet connection. The collected data is then processed by a microcontroller. The main components used in this system include the ESP32 microcontroller, PZEM-004T current sensor, and relay. The results of this study demonstrate that the IoT-based hoist crane motor monitoring and control system functions properly and meets the research objectives.

Keywords: Hoist Crane, ESP32 Microcontroller, PZEM-004T Sensor, IoT.

References

M. F. Hanafi, “Rancang Bangun Sistem Instalasi Overhead Crane Kapasitas 5 Ton Bebrbasis Cupid Radio Remote Control,” Mechonversio Mech. Eng. J., vol. 2, no. 2, p. 39, 2019, doi: 10.51804/mmej.v2i2.617.

A. Shodiq, S. Baqaruzi, and A. Muhtar, “Perancangan Sistem Monitoring dan Kontrol Daya Berbasis Internet Of Things,” ELECTRON J. Ilm. Tek. Elektro, vol. 2, no. 1, pp. 18–26, 2021, doi: 10.33019/electron.v2i1.2368.

S. R. S. -, “Remote Control of Electrical Home Appliances Using RF Module based Remote,” Int. J. Multidiscip. Res., vol. 5, no. 1, pp. 1–10, 2023, doi: 10.36948/ijfmr.2023.v05i01.1328.

I. Hanafi, F. Hunaini, and D. Siswanto, “Monitoring And Control System Of Industrial Electric Motors Using The Internet Of Things Sistem Monitoring Dan Kontrol Motor Listrik Industri Menggunakan Internet Of Things (Iot),” J. Electr. Electron. Eng., vol. 7, no. 1, 2023.

M. Royhan, “M Mengatur Putaran Kanan-Kiri Motor Listrik 3 Fasa dengan Programmable Logic Controller (PLC),” J. Informatics Commun. Technol., vol. 3, no. 1, pp. 1–9, 2021, doi: 10.52661/j_ict.v3i1.67.

W. Sriyanto and S. Setiawidayat, “JASEE Journal of Application and Science on Electrical Engineering,” JASEE J. Appl. Sci. Electr. Eng., vol. 3, no. 2, pp. 27–37, 2022.

A. D. Dharmawan, L. Subiyanto, and A. T. Nugraha, “Implementasi Sistem Monitoring pada Panel Listrik,” Elektriese J. Sains dan Teknol. Elektro, vol. 12, no. 02, pp. 82–91, 2022, doi: 10.47709/elektriese.v12i02.1852.

B. Hussaini, H. O. F, and E. V C, “Arduino Based RFID Line Switching Using SSR,” Int. J. Sci. Technol. Res., vol. 6, no. 10, pp. 98–100, 2017, [Online]. Available: www.ijstr.org

N. Verba, N. Zoltán, and I. Birs, “Microcontroller and RF 434Mhz Communication based Monitoring and Control System,” no. January 2021, 2014.